PY06-XL-1970 GSX


SKU: PY06-XL-1970 GSX Category:


Each urn is hand signed by the artist, James Knake, a professional illustrator/graphic designer with a B.F.A in Illustration from Ringling College of Art & Design.  Read more about James below.

MDF Wood photo frame urn with white stain and glass front.

Slide-out panel for photo makes it possible to change the photo without disturbing the cremains.  Loads from the back and securely closes with metal screw. 

Outer Dimensions:  8.5″ L x 6″ W x 5.5″ D

Inside Dimensions:  7.5″ x 4.5″ x 5.25″

Photo Size: 5″ x 7″

Capacity: 175 cu. in.

GSX / GSX Stage1 was Buick’s contribution to the Classic era American Muscle car list, based on the GS455 which was in turn based on the Skylark platform adding an appearance, performance and handling package available starting in the 1970 model year. The GSX Performance and Handling package was a $1,100 option on the GS455. The GSX was Buick’s attempt to increase showroom traffic on a newly designed Skylark body style for 1970! which started off slow but sales improved. The GSX was Buick’s answer to Pontiac’s GTO Judge, Oldsmobile’s 4-4-2 W-30, and Chevrolet’s Chevelle SS. Buick advertised it as “A Brand New Brand Of Buick” and “Another ‘Light Your Fire’ Car From Buick”. It came standard with a 455ci engine with or without the optional Stage 1 performance engine upgrades during the first year of release. Although near the top of GM’s brand hierarchy, the GSX hardtop’s basic bodyshell was the same as the lower-priced 1970 Chevrolet Chevelle but with differing guards, grill, bumpers, doors, etc, while Pontiac and Oldsmobile midsize hardtop coupes shared a slightly different body.

Due to the late introduction of the GSX, a very special prototype was displayed at the Chicago Motor Show in February 1970 to test consumer reaction. This particular GSX had Mother Of Pearl white paint, a special fiberglass/steel ram air hood with unique modified hood scoops, one-off 3 piece rear spoiler and a prototype front spoiler, custom multicolored leather interior featuring checkerboard black and white X patterned seats and door panels. It became a hit and production started with the factory GSX looking slightly different than the prototype GSX. The GSX did not appear in the standard model catalog for 1970, however a GSX pamphlet was made available to the public. A four page, full size pamphlet announced the GSX with artist drawn pictures and specifications. Only 678 GSXs were produced in the second half of the 1970 model year beginning in March 1970. and ending in May of 1970. Just 278 were equipped with the standard 455, a further 400 purchasers selected the optional Stage 1 performance package. The impressive performance is partly due to the light weight of the 455 which is roughly 150 lb (68 kg) less than the 426 Hemi or Chevrolet 454. At 510 lb-ft the Buick 455 produced the highest torque output of any American production performance car, a record held for 33 years until finally surpassed by the Series 2 V10 Viper in 2003. The 1970 Buick GSX has, without doubt, the most extensive list of standard equipment high performance features of any classic era muscle car. It is this last fact that truly sets the GSX in a class of its own when compared to its late ’60s – early ’70s peers. Every single 1970 GSX Stage 1 produced received the full list of performance and handling parts. You could buy a poorly optioned Chevelle SS, a lighter yet less luxurious Hemi Roadrunner or even a Pontiac GTO Judge with the smaller 400ci engine and drum brakes, but there is no such thing as an under-equipped 1970 GSX.

In 1970, the GSX option was available in only two colors, Saturn Yellow and Apollo White (in 1971 and 1972 6 other colors were available for the GSX). In 1970 with only full black interior. All GSXs had the distinctive full body length black stripe that crossed over the standard equipment rear spoiler and was outlined in red pin stripes. A large area of the hood was also black with a hood mounted tachometer (Buick engineers disliked the hood tachometer because it was a Pontiac part) and black front spoiler. Also standard equipment were black bucket seats, floor shifter, wide oval tires, quick ratio steering and anti-sway bars front and rear and quad-link suspension attached to a limited-slip rear differential. Some other options were automatic transmission or four speed manual, A/C or Non-A/C. Restored matching numbers versions have sold in Barrett-Jackson’s and Mecum auctions for as much as $200,000.

About the Artist:

James Knake is a professional illustrator/graphic designer with a B.F.A in Illustration from Ringling College of Art & Design. He has had a fascination with cars since he was a young boy. Always playing with car toys and building models. While in high school, he was hanging around with the guys who had Camaros, GTOs, Mustangs, anything fast with a big motor! James became obsessed with Muscle Cars from the 60’s and 70’s. After high school he purchased an old beat up 1967 Pontiac Firebird for $300 and proceeded to spend his time fixing it up and learning on the go. Bodywork, engine rebuilding, electrical systems, you name it. He sold that car years ago, but his love for classic muscle cars continues to this day. Now James has turned his attention to illustrating them. He decided to start painting some of his favorite cars from the 50’s, 60’s and 70’s.

To purchase large signed prints visit the website at Sizes are 11 x 14 – 16 x 20 – 18 x 24